At CleanABoat AntiFouling Services we provide a complete package that is affordable, reliable and above all exceptionally high quality. We take the opportunity to give your hull a good visual inspection during the antifouling process to ensure everything is in good order! We also check for things like osmosis, cracking and early signs of electrolysis! Below we have outlined the usual process we take when performing and Antifouling service. Please read below and let us know if you have any questions or would like a free no obligation quotation. You can do this on our Contact Page here.

The AntiFouling Process Begins!

• Your Vessel is lifted using one of our many travel lift / sea lift facilities. We can also provide a pickup service for your boat should you be unable to arrange delivery to our facilities.
• The hull is thoroughly cleaned using ultra high pressure fresh water to clean and remove most organic growth
• We then move onto inspections and cleaning of the hull water line, removing scum staining on the hull
• All underwater strainers, skin, grates and fittings below the water line are removed, thoroughly cleaned and prepared for AntiFouling. We find it is best to remove these to ensure thorough inspection of inlets and that the units are cleaned and prepared properly.
• The hull, shafts, props, etc are  then inspected again during the preparation stages for priming
• Priming of the hull begins
• If the vessel is stern driven, the leg is thoroughly inspected and cleaned, removing all contaminate from the leg, focusing special attention to the most vulnerable parts of the Stern Drive Leg around the belows where excessive growth can lead to premature failure of the below’s causing sea water to enter the area between the gimbal bearing on the transom and the rear leg bearing which can cause failure and siezure to many related components. This is a very important part of the inspection and cleaning process.
• Advanced Industry leading AntiFoul is applied to the hull after final preparation post the priming stage to the manufacturers specifications.
• Strainers, Grates and underwater fittings that where removed are placed back on the vessel and secured in place.
• All other inlets, hoses, etc are cleaned de masked and put back in place. including speedo, etc.
• Anodes are placed back on the vessel or replaced if required.
• After the manufacturers recommended cure time, the vessel is lifted back into the water. And is ready for delivery. We can deliver the boat back to you if required.

So your interested in a no obligation free quotation? click here or call 0449 266 673 today to talk to Jeff direct!

Advanced Roll on AntiFouling Underway

CleanABoat AntiFouling Services Insurance?

Insurance is a big big thing to us! We treat your vessel like it is our own, and as such we have FULL ship builder/repairer insurance for all forms of vessel repairs on any site within Queensland Australia! Insured to an exuberant amount that allows us to continue working without any concerns and allows you to have peace of mind that no matter what your vessel is insured in our hands! Thankfully we have never had a claim!

want to learn more about our insurance? click here

[Show as slideshow]

[View with PicLens]